40M Meikon Fujifilm X-M1 Underwater Housing Waterproof Case 16-50

Underwater Housing Description:

Professional underwater housing for Fujifilm X-M1 with 16-50mm lens, Use this housing you can take photos or videos underwater up to 60 meters.Ideal for diving at sea, surfing, snorkeling, skiing, yacht or other activities.

Features:

Clear view the camera information and control function
Protects your camera from scratches, sand, dirts, water, snow, etc.
Standard1/4" screw holes at the bottom for additional accessories, like handles, external flash attachment, etc.
Maximum underwater depth is 60M
With leak detector
Clear view to LCD display and full controls

Specifications

Lens: Super clear lens for optimal picture quality
Bracket holes: you can mount on your bracket for underwater shooting
Warranty: 2 years
Screen: Touch screen compatible
Waterproof element: waterproof seal
Material: PC, ABS plastic, Clear plate glass, stainless steel, EPDM rubber, O-Ring
100% tested: we test every single one case to ensure the 100% waterproof
Net weight: 1153g
Lens fit: 16-50mm lens
Size: 190 L * 190 W * 145 H
IP: 40m waterproof * 1m shockproof
Working temperature: 0-40℃ (32-104℉)

Package Include:

1 * underwater housing for Fujifilm X-M1 16-50mm lens
1 * O-ring gasket
1 * Cleaning Fluid
1 * Neck strip
1 * wrist rope
1 * Use manal

Attention before use:

Check whether good of performance first. Also check whether have sand and dust inside of case.
Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
Make sure there have no water inside. Then put your camera into waterproof case.

Optional Accessories

Double Handles Aluminium Tray Set For Fujifilm X-M1 Housing

60m/195ft Waterproof LED Flashlight For Underwater Camera Housing

Fijifilm X-M1 Review:

Fujifilm brings its interchangeable-lens camera line down another price notch with the addition of the X-M1, X-M1 displays the best photo quality thus far in a sub-$1,000 camera kit. the X-M1 is a very different camera to its higher-end siblings. Gone are the traditional shutter speed and exposure compensation dials from the top-plate, along with the aperture ring from the new XC 16-50mm F3.5-5.6 OIS kit zoom. Thanks to Fujifilm's X-Trans sensor and excellent image processing, even the JPEG photos are not just usable, but really good up through ISO 1600.

Fujifilm X-M1 specification highlights

Twin control dials, top and rear
Focus peaking (for setting focus before shooting)
920k dot 3-inch 3:2 LCD display - tilts 120° upwards and 80° downwards
ISO 200-6400, expandable to 100 - 25600
Up to 5.6 fps continuous shooting
Built-in Wi-Fi for image transfer to mobile device or PC
16MP X-Trans CMOS APS-C sensor, EXR Processor II
0.5 sec startup time
1920 x 1080 Full HD movie recording at 30 fps with stereo sound

Features:

Clear view the camera information and control function
Protects your camera from scratches, sand, dirts, water, snow, etc.
Standard1/4" screw holes at the bottom for additional accessories, like handles, external flash attachment, etc.
Maximum underwater depth is 60M
With leak detector
Clear view to LCD display and full controls

Package Include:

1 * underwater housing for Fujifilm X-M1 16-50mm lens
1 * O-ring gasket
1 * Cleaning Fluid
1 * Neck strip
1 * wrist rope
1 * Use manal

Specifications

Lens: Super clear lens for optimal picture quality
Bracket holes: you can mount on your bracket for underwater shooting
Warranty: 2 years
Screen: Touch screen compatible
Waterproof element: waterproof seal
Material: PC, ABS plastic, Clear plate glass, stainless steel, EPDM rubber, O-Ring
100% tested: we test every single one case to ensure the 100% waterproof
Net weight: 1153g
Lens fit: 16-50mm lens
Size: 190 L * 190 W * 145 H
IP: 40m waterproof * 1m shockproof
Working temperature: 0-40℃ (32-104℉)

Attention before use:

Check whether good of performance first. Also check whether have sand and dust inside of case.
Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
Make sure there have no water inside. Then put your camera into waterproof case.